Euphonix EuCon - Manual (Page 41)

professional control surface
Artist Series
USER GUIDE
EuControl
41
Chapter 5: EuControl
EuControl is launched automatically upon starting your Mac and runs in the
background. EuControl is responsible for finding, linking, and communicating
with all MC Mixes and MC Controls on the network. EuControl’s configuration
tasks are accessed by clicking the green icon
on the Mac taskbar and selecting
EuControl Settings.
Only one instance of EuControl can run on a workstation. However, multiple work-
stations on a single network can each run EuControl. Each instance of EuControl
can connect up to four MC Mixes on the network. These multiple MC Mixes act
together as a single control surface. Once connected, these MC Mixes are not
available to other instances of EuControl until relinquished.
Figure 5-1 Selecting EuControl Settings from the taskbar
The tabs are discussed in the order (left to right) they appear at the top of the
EuControl Settings dialog.
5.1 Surfaces
The Surfaces tab shows all MC Mixes on your network and the MC Mixes connect-
ed to your instance of EuControl.