Euphonix EuCon - Manual (Page 42)

professional control surface
Artist Series
USER GUIDE
EuControl
42
Figure 5-2 Surfaces tab
All Surfaces
All Surfaces shows all MC Mixes on the network. An MC Mix shown in light gray
is already connected either to your own or another instance of EuControl run-
ning on a different workstation. In both cases, it is not selectable.
My Surfaces
My Surfaces shows the MC Mixes connected to your instance of EuControl. If there
is more than one MC Mix in this list, they are linked into a single large surface.
The top-to-bottom order corresponds to the left-to-right order of the surfaces,
respectively. The leftmost MC Mix has fader strip 1. Use the
and buttons
to reorder the list.
Each MC Mix can be renamed by double-clicking the existing name and typing a
new name.
Add B
Click Add B to add the selected All Surfaces entry to My Surfaces. This connects
this MC Mix to your instance of EuControl. You can also click and drag an MC Mix
from All Surfaces to My Surfaces.