Epson ELPDC02 - Manual (Page 25)

Using the Document Camera 19
Adjusting the Lighting
If you are presenting printed material or 3-D objects, the two upper
lamps will provide ample light. If the ambient lighting in the room is
sufficient, however, you may obtain a better image with the upper
lamps off. Press the
Upper button on the control panel or remote
control to turn off the lamps. Press it again to turn the lamps back on.
If you are presenting transparent material, such as an overhead
transparency, x-ray, slide, blueprint, or negative, you need to use the
base lamp. Press the
Base button on the control panel or remote
control to turn on the base lamp. The upper lamps will turn off
automatically.
note
You can’t have the upper and
base lamps turned on
simultaneously.
Remote control
Upper Base
Control panel
Upper
Base