KEPCO KLN 750W Series, Firmware Version 1.60 to 1.6x - Manual (Page 14)

1-4
KLN 750W 032614
PROGRAMMING CHARACTERISTICS - DIGITAL
Command setting resolution ±0.002% of full scale
Command reading resolution ±0.002% of full scale
Command and D/A
setting accuracy Voltage:
Current: ±0.1% ± 3C(1) at rated voltage
±0.5% ± 3C(1) at rated current
Command and A/D
Measurement accuracy Voltage:
Current: ±0.2% ± 2C(1) at rated voltage (Average Measurement)
±0.5% ± 3C(1) at rated current (Average Measurement)
Command response time
≤
20ms (After received)(2)
RS-485 Digital Interface
(standard) Max baud rate: 115,200
Max number of units
connected to bus:
254
Max. effective control distance: 1000 meters.
GPIB Digital Interface Optional
LAN Digital Interface Optional
PROGRAMMING CHARACTERISTICS - ANALOG
Analog setting accuracy
Constant Voltage mode (CV): Voltage:
Current: ± 5%
± 5%
Constant Current mode (CC): Voltage:
Current: ± 5%
± 5%
Analog monitor accuracy Rated voltage output: 10.00V ± 0.25V
Zero voltage output: 0.00V ± 0.25V
Rated current output: 10.00V ± 0.25V
Zero current output: 0.00V ± 0.25V
PHYSICAL CHARACTERISTICS
Weight Less than 11.2 lbs (5.1 Kg)
Dimensions W x H x D: 8.46" x 1.73" x 18.5" (215mm x 44mm x 470mm)
Source Power Connector IEC 320 inlet
Load Connections 6V to 100V models:
150V to 600V models:
± bus bars with protective cover
5-position Euroblock
Programming Control port 26-pin connector
SER IN port 2-position Euroblock (mating connector supplied)
Sense port 3-position Euroblock (mating connector supplied)
RS-485 port 3-position Euroblock (mating connector supplied)
LAN port (optional) RJ 45 connector
GPIB port (optional) Standard IEEE 488.2 GPIB connector
(1) C = 1 count of the last displayed digit.
(2) Programming time = Command response time + Output response time. The output response time differs for different models,
from 30mS ~ 200mS
TABLE 1-2. KLN 750W GENERAL SPECIFICATIONS (CONTINUED)
SPECIFICATION RATING/DESCRIPTION