KEPCO KLP Series Developers Guide, Rev 3 - Manual (Page 125)

KLP 041213
B-19
B.70 SYSTem:COMMunication:LAN:AUTO? QUERY
SYST:COMM:LAN:AUTO?
[E-SERIES MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:AUTO? Long Form: SYSTem:COMMunication:LAN:AUTO?
Return Value: {ON | OFF}
Description: Indicates whether AUTO IP is set to ON or OFF.
B.71 SYSTem:COMMunication:LAN:DHCP COMMAND
SYST:COMM:LAN:DHCP
[E-SERIES MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:DHCP {ON | OFF}
Long Form: SYSTem:COMMunication:LAN:DHCP {ON | OFF}
Description: Specifies the DHCP MODE. When set to OFF, the static addresses set by the user from the front
panel or using SYST:COMM:LAN commands are used for LAN communication. When set to ON, the
unit queries the DHCP server for a valid IP address.
B.72 SYSTem:COMMunication:LAN:DHCP? QUERY
SYST:COMM:LAN:DHCP?
[E-SERIES MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:DHCP? Long Form: SYSTem:COMMunication:LAN:DHCP?
Return Value: {ON | OFF}
Description: Indicates whether DHCP is set to ON or OFF.
B.73 SYSTem:COMMunication:LAN:DNS COMMAND
SYST:COMM:LAN:DNS
[E-SERIES MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:DNS {w,x,y,z}
Long Form: SYSTem:COMMunication:LAN:DNS {w,x,y,z}
where w, x, y, and z are numbers from 0 to 255
Description: Specifies the DNS address when DHCP MODE (see PAR. B.69) is set to OFF. (Note that DNS
address must be comma-separated.)
B.74 SYSTem:COMMunication:LAN:DNS? QUERY
SYST:COMM:LAN:DNS?
[E-SERIES MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:DNS? Long Form: SYSTem:COMMunication:LAN:DNS?
Return Value: <int_value> {w,x,y,z}
where w, x, y, and z are numbers from 0 to 255
Description: Indicates the static DNS address (comma separated). For example, DNS address of 4.4.4.1
returns 4,4,4,1.
B.75 SYSTem:COMMunication:LAN:GATE COMMAND
SYST:COMM:LAN:GATE
[E-SERIES MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:GATE {w,x,y,z}
Long Form: SYSTem:COMMunication:LAN:GATE {w,x,y,z}
where w, x, y, and z are numbers from 0 to 255
Description: Specifies the GATE address when DHCP MODE (see PAR. B.69) is set to OFF. (Note that GATE
address must be comma-separated.)
B.76 SYSTem:COMMunication:LAN:GATE? QUERY
SYST:COMM:LAN:GATE?
[E-SERIES MODELS ONLY]
Syntax: Short Form: SYST:COMM:LAN:GATE? Long Form: SYSTem:COMMunication:LAN:GATE?
Return Value: <int_value> {w,x,y,z}
where w, x, y, and z are numbers from 0 to 255
Description: Indicates the static GATE address (comma separated). For example, GATE address of 0.0.0.0
returns 0,0,0,0.