KEPCO MAT Full Rack MAT 6V, 15V, 25V AND 36V MODELS - Manual (Page 12)

1-4 MAT FULL RACK 022300
1.4 DC OUTPUT RATINGS FOR 1/3, 2/3 AND FULL RACK MODULES
a) MAT Power Module DC Output Ratings 1/3, 2/3, and Full Rack Size - see Table 1-2
b) Output range:
1) Voltage mode: 0-100% of rated voltage
2) Current mode: 0-100% of rated current
Protection
Overvoltage Tracks program voltage, Crowbars output and turns off input
Overcurrent Tracks program current, Crowbars output and turns off input
Overtemperature
Monitors heat sink temperature, Crowbars output and turns
off input
Polarity Reversal Built in diodes protect unipolar supply output
Power Loss Detects loss of ac input power, disables output
Source Connections
3-wire power entry, via user-configurable mating connector
(supplied) and proper gage wires (not supplied)
Load Connections
5-wire connection, via user-configurable mating connector
(supplied) and proper gage wires (not supplied)
DC Power Output: 2 wires
Output Sense Terminals: 2 wires
Ground:
1 wire
Remote Control
Signal Connections
Two 2-wire connections via user-configurable mating
connector supplied and 22 AWG wire (not supplied).
Connectors in parallel for daisy chaining multiple power
supplies (full rack only).
Dimensions See Figure 1-2.
Weight LBS 33 60 75
Mounting Front
Three 1/3 rack
modules plug into
RA 50. One 1/3
and one 2/3 rack
modules plug into
RA 51
One 1/3 and one
2/3 rack modules
plug into RA 51
Full Rack mounts
directly into 19
inch Rack
Filler Panels
For either RA 50
or RA 51
RFP 50-1: 1/3 Panel
RFP 50-2: 2/3 Panel.
TABLE 1-1. MAT POWER MODULE FEATURES AND SPECIFICATIONS (CONTINUED)
PARAMETER CONDITION
MAT POWER MODULE
1/3 RACK 2/3 RACK FULL RACK