Emerson MICRO MOTION 1700 - Manual (Page 114)

10.2 Input/output signals
Input/output signals – Model 1700 transmitter with analog outputs Table 10-2:
Type Description
Output variables • Mass flow
• Volume flow
Inputs/outputs • One active 4–20 mA output
• One active frequency output
HART • Bell 202 signal is superimposed on the primary milliamp out-
put
• WirelessHART available via THUM adapter
Input/output signals – Model 2700 transmitter with analog outputs Table 10-3:
Type Description
Output variables • Mass & volume flow
• Net product content / flow
• Temperature
• Density
• Concentration
Inputs/outputs • Not intrinsically safe
• One active 4–20 mA output
• One active frequency output
• Frequency output can be configured as a discrete output
HART/WirelessHART • Bell 202 signal is superimposed on the primary milliamp out-
put
• WirelessHART available via THUM adapter
• HART communication is unavailable on Foundation fieldbus
and PROFIBUS-PA transmitter versions
Input/output signals – Model 1700 transmitter with intrinsically safe
outputs Table 10-4:
Type Description
Output variables • Mass flow
• Volume flow
Inputs/outputs • One passive 4–20 mA output
• One active frequency output
HART • Bell 202 signal is superimposed on the primary milliamp out-
put
• WirelessHART available via THUM adapter
Specifications
110 Micro Motion ® Model 1700 and 2700