Emerson MICRO MOTION 1700 - Manual (Page 62)

4. Connect wires to the appropriate terminals on the mating connector.
Important
Never ground the shield, braid, or drain wire(s) at the transmitter.
Tip
You may find it easier to unplug the mating connector to connect the wires. If you do so,
remember to firmly reseat the mating connector and tighten the mating connector screws so
that the mating connector cannot accidentally come loose.
Wiring path for transmitters with aluminum housing Figure 5-9:
A. 4-wire cable
B. Mating connector
Mounting and sensor wiring for remote core processor with remote sensor installations
58 Micro Motion ® Model 1700 and 2700