Amprobe ACD-4 Mini-Clamp-DMM - Manual (Page 7)

2
SYMBOLS
X Warning! Dangerous Voltage (Risk of electric shock).
� Caution ! Refer to the user’s manual before using this Meter.
T Double Insulation or Reinforced insulation
B Alternating Current (AC).
F Direct Current (DC).
N Low battery indicator
J
Ground (maximum permitted voltage between terminal and
ground).
�
Please remove all the test leads before preforming maintenance,
cleaning, battery replacement, fuse replacement, etc
� Complies with European Directives
� Conforms to relevant Australian standards
=
Do not dispose of this pruduct as unsorted municipal waste.
Contact a qualified recycler for disposal
�
Warnings!
To ensure safe operation and service of the Meter, follow these instructions.
Failure to observe warnings can result in severe injury or death.
• Do not operate this meter in explosive gas (material), combustible gas
(material) steam or filled with dust.
• When using test leads or probes, keep your fingers behind the finger
guards.
• Remove test lead from Meter before opening the battery door or Meter
case.
• Avoid working alone so assistance can be rendered.
• Do not use test leads or the Clamp Meter if they look damaged.
• Do not use the Meter if the Clamp Meter is not operating properly or if
it is wet.
• Use the Clamp Meter only as specified in the Instruction card or the
protection by the Clamp Meter might be impaired.