Epson 1EMP-S1 - Manual (Page 23)

22
EMP-S1 User’s Guide
Turning off the Projector
A Turn off the power to the computer/video equipment.
B Press the [Power] button.
A confirmation screen is displayed.
C Press the [Power] button again.
The power indicator begins to blink.
D Wait until the power indicator lights orange.
Cool-downg takes place. It takes about 20 seconds.
E Unplug the projector from the outlet.
F Unplug the power cable at the projector.
G Replace the lens cover.
p
The confirmation screen disappears if anything other than
the [Power] button is pressed, or if nothing is pressed for 7
seconds.
c Do not remove the plug while the power indicator is blinking,
or this may damage the projector.