Epson 1EMP-S1 - Manual (Page 27)

26
EMP-S1 User’s Guide
Selecting the Input Source
When a device is connected, projection commences automatically
without having to select the input source, however when connected to
two or more devices, select desired the input source.
Projector
The input source changes each time [Source] is pressed.
* The items selected using the "Input signal" command in the "Image"
menu are displayed. s "Image menu" P.35
Remote control
The input source switches between Computer and Component video
whenever the [Computer] button is pressed, as shown above.
The input source switches between S-Video and Video whenever the [S-
Video/Video] button is pressed, as shown above.
*
Computer/
Component
video
S-Video
Video
p If two or more sources are connected, be sure to swap the audio
cables between the connected equipment, when necessary.
Computer
Component Video
Component Video
S-Video
Video