Epson 1EMP-S1 - Manual (Page 56)

55
EMP-S1 User’s Guide Appendices > Projector Care
Replacing consumables
f Changing the battery
(Remote Control, Presentation Remote Controller)
Replacement battery: 1 × CR2025 lithium battery
A Remove the battery holder.
While pressing the catch of the battery holder inwards, pull the battery
holder out.
B Remove the old battery and insert the new one.
Check the position of the (+) mark inside the battery holder to ensure
that the battery is inserted the correct way.
C Replace the battery holder.
Press the battery holder in until it clicks.
c Keep batteries away from children to avoid the risk of accidents.
If a child swallows the battery, contact your doctor immediately.
p Please dispose of used batteries in accordance with local
waste disposal regulations.