Amprobe AM-100 Digital-Multimeters User Manual

Page 8

Advertising
background image

7

µA, mA, and A Current functions
Default at DC. Press SELECT button momentarily to select AC.

CAUTION

When measuring a 3-phase system, special attention should be taken to the

phase-to-phase voltage which is significantly higher than the phase-to-earth voltage.
To avoid exceeding the voltage rating of the protection fuse(s) accidentally, always

consider the phase-to-phase voltage as the working voltage for the protection fuse(s).

Beep-Jack™ Input Warning
The meter beeps to warn the user against possible damage to the meter due to
improper connections to the

µA, mA, or A input jacks when other function (like voltage

function) is selected.

Temperature function (AM-110 only)

Be sure to insert the banana plug type-K temperature bead probe Bkp60 (Optional
purchase) with correct

polarities. Defaults at degree C (Celsius). Press

SELECT button momentarily to select degree F (Fahrenheit). You can also use a plug

adapter (Optional purchase) with banana pins to type-K socket to adapt other type-K
standard mini plug temperature probes (refer to www.amprobe.com).

Advertising
This manual is related to the following products: