Amprobe TC-253B Temperature-Converter - Manual (Page 3)

� WARNING!
• TO AVOID ELECTRICAL SHOCK, DO NOT USE THIS INSTRUMENT WHEN VOLTAGES
AT THE MEASUREMENT SURFACE EXCEED 24V r.m.s. AC OR 60V DC.
• TO AVOID DAMAGE OR BURNS – DO NOT MAKE TEMPERATURE MEASUREMENTS
IN MICROWAVE OVENS.
UNPACKING AND INSPECTION
Upon removing your new Temperature Converter from its packing, you should
have the following items:
1. Temperature Converter
2. K-type Bead Thermocouple
3. Operator’s Manual
FRONT PANEL
Refer to Figure 1 and the following numbered steps to familiarize yourself with the
meter’s front panel controls and connectors.
1. Red LED: Flashing while turned ON.
2. Function Switch: Slide switch used to select measuring function.
3. Output plugs: Voltage output.
4. Thermocouple Input Connector.
Figure 1
3
1
4
2