Amprobe AMB-50 Insulation-Resistance-Tester User Manual
Page 8
2
SYMBOLS AND WARNINGS
SYMBOLS
N
Battery
�
Refer to the manual
T
Double Insulated
X
Dangerous Voltage
B
Alternating Current
J
Earth Ground
F
Direct Current
I
Symbol
,
Application around and removal
from hazardous live conductors is
permitted
�
Complies with EU directives
=
Do not dispose of this product as
unsorted municipal waste
�
Conform to relevant Australian
standards
UNPACKING AND INSPECTION
Your shipping carton should include:
1 AMB-50 Insulation Resistance Tester
1 Test Leads (1 set)
1 Test Probe (1 set)
1 Plug type test Lead with Alligator clip (Green)
1 Plug type test Lead with Alligator clip (Black)
1 Two Plugs type test lead with Alligator clip (Red)
8 Batteries (1.5V, LR14)
1 Users Manual
1 Tool Box
1 Software
1 USB Cable
1 Power adaptor
If any of the items are damaged or missing, return the complete package to the place of purchase
for an exchange.
INTRODUCTION
AMPROBE,AMB-50 insulation resistance tester is a handheld instrument designed primarily to make
resistance/ insulation resistance measurement.
SAFETY INFORMATION
This Meter complies with the standards IEC61010 safety measurement requirement: in pollution
degree 2, overvoltage category (CAT. III 600V) and double insulation.
CAT II: Local level, appliance, PORTABLE EQUIPMENT etc., with smaller transient voltage
overvoltages than CAT. III
Use the Meter only as specified in this operating manual, otherwise the protection provided by the
Meter may be impaired.