Avago Technologies Syncro CS 9271-8i User Manual
Avago Technologies Hardware
Advertising
Table of contents
Document Outline
- Syncro CS 9271-8i Solution User Guide
- Chapter 1: Introduction
- Chapter 2: Hardware and Software Setup
- Chapter 3: Creating the Cluster
- 3.1 Creating Virtual Drives on the Controller Nodes
- 3.2 HA-DAS CacheCade Support
- 3.3 Creating the Cluster in Windows
- 3.4 Creating the Cluster in Red Hat Enterprise Linux (RHEL)
- 3.4.1 Prerequisites for Cluster Setup
- 3.4.2 Creating the Cluster
- 3.4.3 Configure the Logical Volumes and Apply GFS2 File System
- 3.4.4 Add a Fence Device
- 3.4.5 Create a Failover Domain
- 3.4.6 Add Resources to the Cluster
- 3.4.7 Create Service Groups
- 3.4.8 Create a Disk Quorum
- 3.4.9 Edit the Cluster Configuration File
- 3.4.10 Mount the NFS Resource from the Remote Client
- 3.5 Creating the Cluster in SuSE Linux Enterprise Server (SLES)
- Chapter 4: System Administration
- Chapter 5: Troubleshooting