Avago Technologies Syncro CS 9271-8i User Manual
Page 44
LSI Corporation
- 44 -
Syncro CS 9271-8i Solution User Guide
October 2013
Chapter 3: Creating the Cluster
Creating the Cluster in SuSE Linux Enterprise Server (SLES)
Perform the following steps to revise the cluster Communication Channels, Security, Service, Csync2 and conntrackd
settings.
1.
Start the cluster module from command line by entering the following command.
yast2 cluster
2.
After the fields in the following screen display the information (according to your setup), click the check box next
to the Auto Generate Node ID field to automatically generate a unique ID for every cluster node.
3.
If you modified any options for an existing cluster, confirm your changes, and close the cluster module. YaST
writes the configuration to /etc/corosync/corosync.conf.
Figure 30 Cluster Setup on the Communication Channels Tab