Connectors, leds, and jumpers, Connectors, leds, and jumpers -2 – Avago Technologies AcceleRAID 160 User Manual
Page 14
Advertising
Performing an Installation
2
AcceleRAID 160 Quick Installation Guide
Connectors, LEDs, and Jumpers
There is one external and one internal connector supported on the
AcceleRAID 160 controller. The locations of the SCSI connectors are shown
in Figure 1 and Figure 2 and are labeled as CH 0.
There are two types of brackets: Standard PCI bracket (Figure 1) and Low
Profile PCI bracket (Figure 2).
Figure 1. AcceleRAID 160 Controller with Channel 0 Connectors and
Standard PCI Bracket
Figure 2. AcceleRAID 160 Controller with Channel 0 Connectors and
Low Profile PCI Bracket
CH 0
CH
0
CH 0
CH
0
Advertising