How to maintain, Empty dust cup, How to clean dust cup filter – Eureka 92A User Manual

Page 7

Advertising
background image

7

HOW TO MAINTAIN

The instructions in this booklet serve as a guide to routine maintenance. To keep the
cleaner operating at top efficiency empty the dust cup and clean the filter after each use.

Empty Dust Cup

Note:

Turn off the power switch before emptying dust cup.

Latch

Handle

Dust
Cup

,,

,,

1. The telescoping handle must be completely

extended to remove the dust cup.

2. Push down on the top of the dust cup latch.

2. Pull dust cup from handle section and lift

from the nozzle.

3. Grasp the edge of dust cup filter and pull

out to remove.

Clean motor filter (refer to

dust cup filter section).

4. Shake contents of dust cup into waste

container.

5. Replace dust cup filter.

6. Fit dust cup and motor unit back together

and push firmly until latch clicks into place.

Dust Cup
Filter

How to Clean Dust Cup Filter

,,,

,,,

,,,

1. Separate dust cup from motor unit.

2. Pull dust cup filter out of dust cup.

3. Shake and brush the dust and dirt from filter.

4. If desired, launder the filter by hand in warm water using

a mild detergent.

5. Air dry thoroughly before returning to use.

6. Replace dust cup filter in dust cup. Fit dust cup and

motor unit back together and push firmly until latch clicks
into place.

Motor
Unit

Note:

Turn off the power switch and unplug the electrical cord to service.

Clean the dust cup filter after each cleaner use.

Replace a dirty or torn filter. Order additional dust cup filters from The Eureka
Company, Bloomington, IL 61701. Order dust cup filter, part number 60796. To
place an order please telephone 1-800-438-7352.

Advertising