Cleaner care, How to store unit, How to maintain – Eureka 92A User Manual

Page 8: How to change batteries

Advertising
background image

8

Cleaner Care

NOTE: Turn off power switch before cleaning unit.

To keep the vacuum cleaner looking new, it can be wiped with a damp cloth and a mild
soap solution, then thoroughly dried. Never use any type of chemical as chemicals can
damage the cleaner.

How to Store Unit

Use the hole in the handle to hang the
cleaner for storage or stand upright by
itself.

Hole in the Handle

HOW TO MAINTAIN

(continued)

How To Change Batteries

1. Find the battery cover located on the back of

the vacuum.

2. Use a screwdriver at either bottom corner of

the battery cover to pry the battery cover up
and off the vacuum.

3. Remove the battery pack by disconnecting

the two wires attaching it to the vacuum. After
disconnection pull out battery pack.

4. Put the new battery pack into the vacuum with

contact strips facing out. Connect the wires.
(Hook the black lead to the top contact strip
and the red lead to the bottom contact strip.

5. Replace battery cover.

Advertising