EMC QLogic - Manual (Page 80)

4
4-6 EMC Fibre Channel with QLogic HBAs in the Windows Environment
Installing and Configuring the QLogic QLA4010 iSCSI HBA (TOE)
Using the QLogic iSCSI SANSurfer Application to Configure iSCSI
Devices
QLogic provides a minimal version of their SANSurfer software that
is used to configure settings for the QLA4010 iSCSI HBA. For config-
urations not using Microsoft’s iSCSI Initiator, the SANSurfer iSCSI
HBA Manager should be used to configure your iSCSI HBAs.
Install the SANSurfer iSCSI HBA Manager on your server using the
self-extracting executable installation package (available in the EMC
QLA4010 CD-ROM kit or from the qLogic website
http://www.qlogic.com .) During installation, you may choose
whether to install both the GUI and Agent, or just the GUI. If you are
installing on the system that has the QLA4010 HBA(s) installed,
install both the GUI and Agent.
After SANSurfer is installed, it can be started from the Start menu, or
from the desktop icon if you choose to create one. Start the software,
and you will reach the connection dialog shown below:
Click Connect in the upper left corner of the SANsurfer iSCSI HBA
Manager
window to get the Connect to Host dialog. You are asked
QLogic_Windows.book Page 6 Thursday, March 10, 2005 10:31 AM