PLANET ADN-4000 - Manual (Page 100)

3.6.2 System Log
Click “System Log” to show the following interface. The system log dialog allows you to view
the system log and configure the system log options.
Figure: System Log overview
Click “Configure System Log” to show the following interface. You can enable or disable the
system log and then select the log level, display level and mode, and click “Apply” to end
your configurations.
Both the log level and display level have eight choices. The default log level is “Debugging”
and the default display level is “Error”.
The mode options are “Local”, “Remote”, and “Both”. The default one is “Local”.
100