PLANET ADN-4000 - Manual (Page 95)

3.4.2 Wireless – Security
Choose Wireless > Security, the following page appears. In this page, the data is not
the default encrypted when it is transferred from the device to the client station. This is
option.
Enable WSC: If enable Manual Setup AP, you can not enable WSC.
Select SSID: Select the wireless LAN of SSID to configure security features.
Network Authentication: Select the authentication mode for the selected wireless
LAN of SSID to be open. That is no WEP encryption, so the WEP Encryption
disabled.
P
If you select the “Shared” as the Network Authentication, you can select 64-bit or
as the Encryption Strength. In the following figure, select 64-bit as an example.
is
64-bit WE
128-bit
95