PLANET FPS-1012N - Manual (Page 29)

2.5 Using the MFP
After you have followed the install wizard to finish the MFP installation, the
MFP is now connected to your computer. You can start sharing print, scan,
card reader or fax function provided by the MFP.
" Note
1. If you have finished using the MFP, please click
“Disconnect” to release the MFP. Another users can’t
use the MFP until the MFP is released
2. It is recommended to enable “Auto Release” setting.
The MFP Server will auto release your connection to
the MFP after a period of idle time that you have
assigned. So the MFP will not be occupied too long and
other users can share the MFP frequently. Please refer
to Section 6.1 for more information.
29