PLANET FPS-1012N - Manual (Page 69)

Chapter 3 Software Installation
The following are the installation steps in Windows 98SE. To install MFP
Server in Windows Me/NT, the procedures are similar.
1. Insert the supplied CD ROM along with the FPS-1012N into your
CD-ROM drive. The Autorun.exe program should be executed
automatically. If not, run Autorun.exe manually from CD-ROM drive’s
root directory.
2. The “Installation Manager” will be displayed on the screen as following.
Click “Utility”.
3. The message is prompted to remind you that the MFP Server will only
support print sharing function since the operation system of your
computer is Windows 98SE/Me/NT. Click “Ok”.
4. The “PLANET MFP Server Utilities - InstallShield Wizard ” will be
displayed. Click “Next”.
69