PLANET NAS-3410 - Manual (Page 21)

13
saving copies in the system folder.
3.5 Shutting Down the Server
Shutdown, reboot and startup actions
The NAS-3410 can be shut down by pressing the power button twice at the front of the server
case. The whole shutdown process might take seconds to minutes until data are all safely saved
to the hard disks.
To shut down the server from the Administration Homepage, select Shutdown from the Server
menu and click the Reboot or Shutdown button.
You can specify the actions to take during the next startup.
Recalculate user quota information Recalculate the storage consumption per user
during the next startup. It may take much time if
there are a huge amount of files in disk.
Reset configuration to factory default Reset the server settings, network settings and
event configuration to factory default during the
next startup.
The settings related to the storage, like shares,
ACLs, user database, will not be cleared.
Scheduled shutdown and power-on
To set the automatic power-on and shutdown schedules, select the Server
ÆShutdown menu.
Click the Schedule tab to modify the schedules.
On the schedule settings page, you can set daily or day of month schedules. Check the Enable
check-boxes and specify the time of powering on or shutting down. Remember to click the Apply
button to submit the changes.
3.6 Upgrading the Firmware
Once you get the image file of the new firmware, open the Administration Homepage of the
NAS-3410 and select the Server
ÆUpgrade menu. Specify the full path of the image file or click
the Browse… button to find it. Click Apply to begin. The process might take several minutes. The
server will reboot after the firmware is upgraded.
3.7 License for Optional Features
Optional software features of the NAS-3410s are disabled by default. You have to get a license
key from your vendor and activate the optional features before you can use them.