PLANET NAS-3410 - Manual (Page 79)

On the NAS-3410 which acts as the SmartSync client, set up a SmartSync task, which defines the
schedule settings and the target folder.
To set up a SmartSync task, please go to the Backup ÎSmartSync ÎTask menu on the
Administration Page. Click the Add Task button.
Follow the steps to take to add the SmartSync task.
Step 1 is to specify the IP address of the SmartSync server.
Step 2 is to choose a sync point of “Distribute” mode in the SmartSync server. Please also
provide a user account with the privilege to request data from the sync point.
Step 3 is to complete the task settings. On the page you should provide the task name, select the
target folder to receive data, specify the schedule and configure the SmartSync options.
Step 4 is for confirmation, showing the brief information of the task settings.
73