BenQ TH530 - Manual (Page 42)

Operation 42
Function Description
Presentation
Timer
Reminds the presenter to finish the presentation within a certain time
frame. See "Setting the presentation timer" on page 30 for details.
Language
Sets the language for the On-Screen Display (OSD) menus. See "Using
the menus" on page 21 for details.
Projector
Installation
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See "Choosing a location" on page 13 for details.
Menu
Settings
Menu Display Time
Sets the length of time the OSD will remain active after your last key
press.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Sets the reminder messages on or off.
Operation
Settings
Direct Power On
Allows the projector to turn on automatically once the power is fed
through the power cord.
Signal Power On
Sets whether to turn the projector directly on without pressing
POWER or ON when the projector is in standby mode and the signal
is feed through the VGA cable.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See "Setting Auto Power Off" on
page 47 for details.
Quick Cooling
Enables or disables the Quick Cooling function. Selecting On enables
the function and projector cooling time will be shortened from a
normal 90-second duration to approximately 15 seconds.
This function is only available when Instant Restart is off.
Instant Restart
Selecting On enables you to restart the projector immediately within
90 seconds after turning it off.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See "Hiding the image" on
page 32 for details.
Sleep Timer
Sets the auto-shutdown timer.
4.
S
Y
ST
EM SE
TUP: Basic
men
u