KORG LP-380-73 User Manual

Page 6

Advertising
background image

6

Using the headphones

Use stereo headphones with a stereo 1/8” mini plug.

Since there are two headphone jacks on the lower left side of the LP-380 keyboard,

two people can enjoy the sound.

If headphones are plugged into the headphone jack, the LP-380’s speakers will not

produce sound.

Use headphones at night or when you don’t want disturb others.

If your headphones feature a standard-to-mini adapter plug, be sure to hold the

adapter plug when you connect or disconnect the headphones.

To protect your hearing, do not listen to loud, high-volume sounds for extended

periods of time through headphones.

Using the music stand

The key cover serves as a convenient music stand. (Fig. 2)

When placing opened music, do not apply strong pressure onto the key cover.

Turning the instrument on

Press the power button to turn on the LP-380. (Fig. 3)

When the instrument is turned on, the buttons on the control panel will light up.

To turn the instrument off, press the power button again.

When the instrument is turned off, all functions and parameters, except the

auto power off function return to their factory default settings.

Auto power off function

When 30 minutes have passed without user input or demo performance, the in-

strument will be automatically turned off. To disable this function, turn off the

auto power off function (see page 13).

Adjust the volume

Rotate the VOLUME knob that’s located next to the power switch toward “MAX” to

raise the volume level.

Rotate it left toward “MIN” to lower the level. (Fig. 3)

The VOLUME knob controls the output level of the built-in speakers, the head-

phones jacks and the LINE OUT jacks.

It is always better to start with a low volume and then increase gradually.

Using the LINE OUT jack

Use the LINE OUT jack, if you want to connect your LP-380 to a mixer, stereo hi-fi,

or a couple of active monitors. When using a stereo hi-fi, connect the LINE OUTs to

the AUX or LINE inputs.

You must only connect devices with the power turned off. Careless operation

may damage the LP-380 or the device where it’s connected, or malfunctions

may be caused.

Connection cables are sold separately. You will need to obtain the appropriate

commercially-available cables for your equipment.

Fig. 2

Fig. 3

Softer

Louder

Advertising