KORG D3200 User Manual
Owner’s manual
                                    Advertising
                    
                        
                    
                            
            
                            
                        Table of contents
                        
                            
                    
                Document Outline
- Table of Contents
 - IMPORTANT SAFETY INSTRUCTIONS
 - Introduction
 - Quick Start
- Step 1: Preparations
 - Step 2: Quick recording
 - Step 3: Overdubbing
 - Step 4: Mixdown and mastering
- 1. Applying effects and EQ to individual channels
- Applying effects to individual channels/tracks (Insert Effect)
 - Applying EQ to each channel/track
 - Adjusting the pan
 - Using the channel/track sends to apply effects (Master Effects)
 - Selecting a master effect
 - Adjusting the Master Effect 1 Send amount for each track
 - Checking and adjusting the master effect
 
 - 2. Applying Final (or mastering) effects and EQ to the entire song
 - 3. Recording the master track
 - 4. Writing to a CD
 - Saving your song
 
 - 1. Applying effects and EQ to individual channels
 
 - Operation
- Song, Locate
- 1. Selecting/creating a song
 - 2. Location
 - 3. Song editing
 
 - Mixer
- 1. Inputting audio to the mixer
 - 2. Audio outputs from the mixer
 - 3. Mixer settings
 - 4. Storing/recalling a scene
 - 5. Automation
 
 - Effects
 - Session Drums™
 - Recorder
- 1. Recording
 - 2. Playback
 - 3. Track editing
- Registering the edit region
 - 3-1. Track editing procedures
- Copy a track (CopyTrk)
 - Insert blank space (InsertTrk)
 - Erase a track (EraseTrk)
 - Delete a track (DeleteTrk)
 - Exchange tracks (SwapTrk)
 - Reverse a track (ReverseTrk)
 - Optimizing a track (OptimizeTrk)
 - Expand/compress a track (ExpCmpTrk)
 - Copy an entire track/Copying to a Virtual track (CopyWholeTrk)
 - Exchange two entire tracks (SwapWholeTrk)
 - Fade-in/fade-out (FadeTrk)
 - Boosting the maximum volume to the specified level (Normalize: NormalizeTrk)
 - Eliminating noise (NoiseReduction)
 - Erasing punch noise (ErasePunchNoise)
 - Erase a silent region (EraseSilence)
 
 
 - 4. Naming a track
 
 - CD
 - Data
 - Drive
 - USB
 - MIDI
 - Upgrading the system
 - Using a recovery CD to recover the system
 - ClickPoint calibration
 
 - Song, Locate
 - Reference
- Counter
 - Rename
 - 1. METER
 - 2. MIXER
 - 3. CH VIEW
 - 4. EFFECT
 - 5. SEND
 - 6. EQ
 - 7. PAN
 - 8. SONG
 - 9. SYSTEM/MIDI
 - 10. TRACK
 - 11. CD
 - 12. UNDO
 - 13. TUNER
 - 14. SESSION DRUMS
 - 15. STORE
 - 16. SCENE
 - 17. MARK
 - 18. SCRUB
 - 19. LOC 1/IN, … LOC 4/END
 - 20. REC/PLAY MODE
 - 21. Transport keys
 
 - Effect parameters
 - Appendices
- Troubleshooting
- Power does not turn on
 - Nothing appears in the display
 - Vertical lines are visible in the display
 - No sound
 - Faders don't work
 - Can't record
 - Can't use digital input
 - Playback level is lower than the level during recording
 - The input or recorded sound is noisy or distorted
 - Effects do not apply
 - Session Drums
 - A key does not function when pressed
 - MIDI
 - CD-R/RW
 - Audio files
 - USB
 - Startup
 
 - Various messages
 - More about drives and files
 - Specifications
 - Various lists
 - Shortcut keys
 - Glossary
 - Index
 - Block diagram
 - MIDI implementation chart
 
 - Troubleshooting