Monaural-type, Category: reverb&delay reverb/delay-type effects, Effect – KORG D3200 User Manual

Page 169: Rotary speaker, Mono reverb hall 32: mono reverb plate, Mono reverb room

Advertising
background image

159

Effect

Algorithm list

Program list

Stereo type

Algorithm

Monaural type

Algorithm

: Oscillator Frequency [Hz]

This parameter sets the oscillator frequency.

This effect simulates a rotary speaker, and obtains a more re-
alistic sound by simulating the rotor in the low range and the
horn in the high range separately. The effect also simulates
the stereo microphone settings.

: Horn Acceleration, : Rotor Acceleration

On a real rotary speaker, the rotation speed is accelerated or
decelerated gradually after you switch the speed. The “Horn
Acceleration”

parameter sets the speed at which the rotation is

accelerated or decelerated.

: MicDistance, : MicSpread

This is a simulation of stereo microphone settings.

Monaural-type

Category: Reverb&Delay
Reverb/delay-type effects

L-R Phase (LFO L-R Phase)

–180...+180deg

Sets the LFO phase difference between the left and right

L Delay (L Delay Time)

0...2.730sec

Sets the left delay time

R Delay (R Delay Time)

0...2.730sec

Sets the right delay time

HiDamp (High Damp)

53Hz...20.0kHz, THRU

Sets the damping amount in the high range

L Fdback (L Feedback)

–100...+100%

Sets the feedback amount for the left channel

R Fdback (R Feedback)

–100...+100%

Sets the feedback amount for the right channel

Dry:Wet

Dry, 1:99...99:1, Wet

Sets the balance between the effect and dry sounds

In Level (Input Level)

0...100%

Sets the input level to the effect

30: Rotary Speaker

Speed Sw (Speed Switch)

Slow, Fast

Switches the speaker rotation speed between slow and fast

HornRatio (Horn Ratio)

Stop, 0.50...2.00

Adjusts the (high-range side) horn rotation speed. Standard

value is 1.00. Selecting “Stop” will stop the rotation

RotorRatio (Rotor Ratio)

Stop, 0.50...2.00

Adjusts the (low-range side) rotor rotation speed. Standard value

is 1.00. Selecting “Stop” will stop the rotation

Rotor:Horn (Horn:Rotor Balance)

Rotor, 1:99...99:1, Horn

Sets the level balance between the high-range horn and low-

range rotor

Rotate Sw (Rotate Switch)

Rotate, Stop

Switches between speaker rotation and stop

HrnAccel (Horn Acceleration)

0...100

How quickly the horn rotation speed in the high range is

switched

RtrAccel (Rotor Acceleration)

0...100

Determines how quickly the rotor rotation speed in the low

range is switched

MicDistance

0...100

Sets the distance between the microphone and rotary speaker

MicSpread

0...100%

Sets the angle of left and right microphones

Dry:Wet

Dry, 1:99...99:1, Wet

Sets the balance between the effect and dry sounds

Category

No. Name

Size

Reverb&Delay

31 Mono Reverb Hall

1

32 Mono Reverb Plate

1

33 Mono Reverb Room

1

34 Mono ER

1

35 Mono Delay

1

36 Mn.Multitap Delay

1

Modulation&Pitch

37 Mono Chorus

1

38 Mono Flanger

1

39 Mono Phaser

1

40 Mono Tremolo

1

41 Mn.Pitch Shifter

1

Dynamics&Filter

42 Mono Compressor

1

43 Mono Limiter

1

44 Mono Expander

1

45 Mono Gate

1

46 Mono Filter

1

47 Mono Wah

1

SFX&etc

48 AnalogRecord

1

49 Mn.Ring Modulator

1

50 Tube Pre Amp Sim

1

51 Mic Simulator

2

Multi

52 GuitarMulti

8

31: Mono Reverb Hall

32: Mono Reverb Plate

Rev Time (Reverb Time)

0.1...10.0sec

Sets the reverberation time

LoDamp (Low Damp)

THRU, 21Hz...8.00kHz

Sets the damping amount in the low range

HiDamp (High Damp)

53Hz...20.0kHz, THRU

Sets the damping amount in the high range

Dry:Wet

Dry, 1:99...99:1, Wet

Sets the balance between the effect and dry sounds

SideRflct (Side Reflection)

0...100%

Sets the amount of reflections from the side walls

BackRflct (Back Reflection)

0...100%

Sets the amount of reflection from the back wall

33: Mono Reverb Room

Rev Time (Reverb Time)

0.1...3.0sec

Sets the reverberation time

LoDamp (Low Damp)

THRU, 21Hz...8.00kHz

Sets the damping amount in the low range

HiDamp (High Damp)

53Hz...20.0kHz, THRU

Sets the damping amount in the high range

Dry:Wet

Dry, 1:99...99:1, Wet

Sets the balance between the effect and dry sounds

SideRflct (Side Reflection)

0...100%

Sets the amount of reflections from the side walls

BackRflct (Back Reflection)

0...100%

Sets the amount of reflection from the back wall

Monaural type

Algorithm

Stereo type

Algorithm

Advertising