KORG D3200 - Manual (Page 199)

189
MIDI implementation chart
Consult your local Korg distributor for more information on MIDI IMPLEMENTATION.
Basic
Channel
Function
Transmitted
MIDI Implementation Chart
Recognized Remarks
Default
Changed
Date: 2005.4.15 Model D3200
Aftertouch
Pitch bender
Polyphonic (Key)
Monophonic (Channel)
0 – 111
Program
Change
Variable Range
System
Real Time Clock
Command
System Exclusive
System
Common
Quarter frame
Song Position
Song Select
Tune
Mode 1 : OMNI ON, POLY Mode 2 : OMNI ON, MONO : Yes
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO : No
Aux
Messages
Notes
Local On/Off
All Notes Off
Active Sense
Reset
Control
Change
Velocity Note On
Note Off
Note
Number:
True Voice
Mode Memorized
Messages
Altered
0 – 127 *1, *2
*6
*8
*4
*5
*4
*1
*1
*1
*9
*9 *10
*7
[Digital Recording Studio]
*1
*3
EffectControl (Received) ControlChange #000–119 are Recognized
MixerControl (Transmitted/Received) Mixer Ch1–16(Ch17–32) Parameters
7 (39) Fader
8 (40) Pair Switch
9 (41) Channel OnOff
10 (42) Pan
12 –13 (44, 45) EffSend1/2
14 –15 (46, 47) AuxSend1/2
16 –27 (48–59) EQ Low/LMid/HMid/High
28 (60) Channel EQ Switch
29 (61) Attenuator
96 –102 (32–38) Rec/Eff/Aux SendPosition
75 –79
MasterEQ Parameters
80 MasterEff1/2 Return Level
81 MasterEff1/2 Return Balance
85 –86 Aux1/2 Master Level
89 Master Level
103–111 SubMixer Ch1–12 Parameters
*3
*1: Received as the EffectControl when it is selected in [SYSTEM/MIDI] “Control”.
*2: Received as Note events if MIDI is checked in the [SESSION DRUMS] “SessionDr.” DRUM KIT dialog box.
*3: Transmitted/Received as the MixerControl when ControlChange is enabled in [SYSTEM/MIDI] “MIDI/MMC”.
(Consult your local Korg distributor for more information about MixerControl.)
*4: Transmitted/Received when ProgramChange is enabled in [SYSTEM/MIDI] “MIDI/MMC”.
*5: Transmitted when “MMC Transmit”or “MTC Master” is selected in [SYSTEM/MIDI] “MIDI/MMC”.
*6: Received when “MMC Receive” or “MTC Slave” is selected in [SYSTEM/MIDI] “MIDI/MMC”.
*7: Transmitted when “MTC Master” is selected in [SYSTEM/MIDI] “MIDI/MMC”.
*8: Received when “MTC Slave” is selected in [SYSTEM/MIDI] “MIDI/MMC”.
*9: Transmitted when “MIDIClockMaster” is selected in [SYSTEM/MIDI] “MIDI/MMC”.
*10: Received when “MIDIClock” is selected in [SessionDrums] “TempoTrk” to record the tempo.
0 – 100 0 – 100