Format flash, Format flash -12 – Kurzweil Forte User Manual
Page 342
System Mode
System Utilities
14-12
Format Flash
CAUTION: THIS OPERATION ERASES THE OPERATING SYSTEM,
ALL FACTORY OBJECTS AND ALL USER OBJECTS.
Performing this operation will format the Forte’s system flash memory and erase the OS
software as well as all Objects. Do not do this unless you think it is necessary in order to
improve the performance of your Forte. Should you decide to do so, be sure to back up all of
your files and software. After you do this, System Mode will still be available, so you can run
updates and get your Forte up-and-running again. After a Format the unit will come up in
System Mode by default.
To perform a Format, follow these steps:
1. Follow the instructions specified on Page 12-1 to enter System Mode.
2. Select System Utilities.