Nikon Coolpix A10 User Manual

Page 88

Advertising
background image

E

38

Re
fe

ren

ce

S

e

ct

io

n

B

Maximum Movie Length

Individual movie files cannot exceed 4 GB in size or 29 minutes in length, even when there is
sufficient free space on the memory card for longer recording.
The maximum movie length for a single movie is displayed on the shooting screen.
Recording may end before either limit is reached if camera temperature becomes elevated.
The actual movie length may vary depending on the movie content, subject movement, or type of

memory card.

B

Notes About Saving Images and Recording Movies

The indicator showing the number of exposures remaining or the indicator showing the maximum
movie length flashes while images are being saved or while a movie is being recorded. Do not open
the battery-chamber/memory card slot cover or remove the batteries or memory card
while
an indicator is flashing. Doing this could result in loss of data, or in damage to the camera or the
memory card.

B

Notes About Movie Recording

Memory cards with an SD Speed Class rating of 6 or faster are recommended when recording

movies (

F19). Movie recording may stop unexpectedly when memory cards with a lower Speed

Class rating are used.

The optical zoom ratio cannot be changed once recording starts.
Use the zoom control to operate digital zoom while recording movies. The zoom range is

between the optical zoom ratio before recording a movie and up to 4×.

There may be some degradation in image quality when digital zoom is used.
The sounds of zoom control operation, autofocus lens drive movement, and aperture operation

when brightness changes may be recorded.

Smear (F3) visible in the monitor with movie recording is recorded with movies. Avoiding bright

objects such as the sun, reflections of the sun, and electric lights is recommended.

Depending on the distance to the subject or the amount of zoom applied, subjects with repeating

patterns (fabrics, lattice windows, etc.) may have colored stripes (interference patterns, moire, etc.)
in them during movie recording and playback. This occurs when the pattern in the subject and the
layout of the image sensor interfere with each other; it is not a malfunction.

Advertising