Conventions used in this manual, Icons in this manual, Basic assumptions – Canon EOS 1D X Mark II User Manual

Page 6

Advertising
background image

6

In this manual, the term “access point” indicates wireless LAN access
points, wireless LAN routers, etc. that relay a LAN connection.

These instructions should be followed only after setting up your LAN
and FTP server environments. For information about setting up the
environments, refer to the documentation provided with each device
or contact the manufacturer.

Read the Camera Instruction Manual and familiarize yourself with
operating the camera before following the instructions on camera
options.

Icons in this Manual

<6> : Indicates the Main Dial.
<5> : Indicates the Quick Control Dial.
<9> : Indicates the Multi-controller.
<0> : Indicates the Setting button.

* In addition to the above, the icons and symbols used on the camera’s buttons

and displayed on the LCD monitor are also used in this manual when discussing
relevant operations and functionality.

(p.**) : Reference page numbers for more information.

: Warnings to prevent potential problems during operation.
: Supplemental information.

Basic Assumptions

All operations explained in this manual assume that the power
switch is set to <1>.

It is assumed that all the menu settings, Custom Functions, etc. are
set to their defaults.

Conventions Used in this Manual

Image transfer, remote shooting, or viewing images requires adequate
knowledge of configuring your wired LAN and FTP server. Canon cannot
provide support for configuring wired LANs or FTP servers.

Note that Canon cannot be held liable for any loss or damage to the
camera from erroneous network or FTP server settings. In addition, Canon
cannot be held liable for any other loss or damage caused by use of the
camera.

When using wired LAN functions, establish appropriate security at your
own risk and discretion. Canon cannot be held liable for any loss or
damage caused by unauthorized access or other security breaches.

Advertising