FujiFilm X-T20 - Manual (Page 283)

263
P
eripherals and Optional A
c
c
essories
10
External Flash Units
Setting Setting Description Description
B Flash compen-
sation/output
The options available vary with fl ash control mode.
•
TTL: Adjust fl ash compensation (the full value
may not be applied if the limits of the fl ash con-
trol system are exceeded). In the cases of the
EF-X20, EF-20, and EF-42, the selected value is
added to the value selected with the fl ash unit.
•
M/MULTI: Adjust fl ash output (compatible units
only). Choose from values expressed as frac-
tions of full power, from ⁄ (mode M) or ¼ (MULTI)
down to ⁄ in increments equivalent to ⁄ EV.
The desired results may not be achieved at low
values if they exceed the limits of the fl ash con-
trol system; take a test shot and check the results.