FujiFilm X-T20 - Manual (Page 334)

314
T
echnical Not
es
12
Problem Problem Solution Solution
The fl ash does
not fully light
the subject.
•
The subject is not in range of the fl ash: Position the
subject in range of the fl ash.
•
The fl ash window is obstructed: Hold the camera
correctly.
•
Shutter speed is faster than the sync speed: Choose a
slower shutter speed (
P 64, 72).
Some fl ash
modes are not
available.
OFF is selected for SOUND & FLASH: Select ON
(
P 206).
Pictures are
blurred.
•
The lens is dirty: Clean the lens ( P 276).
•
The lens is blocked: Keep objects away from the lens
(
P 49).
•
s is displayed during shooting and the focus frame
is displayed in red: Check focus before shooting
(
P 50).
Pictures are
mottled.
•
Shutter speed is slow and the ambient temperature is
high: This is normal and does not indicate a mal-
function.
•
Pixel mapping is required: Perform pixel mapping
using
H IMAGE QUALITY SETTING > PIXEL
MAPPING ( P 130).
•
The camera has been used continuously at high tem-
peratures or a temperature warning is displayed:
Turn the camera off and wait for it to cool down
(
P 42).