Eiki LC-WB40N - Manual (Page 47)

47
Language
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, and Japanese.
Set the red frame
pointer to the item
and press the
SELECT button.
Press the SELECT button
at Language, then the
Language Menu appears.
Setting Menu (Language)
Setting Menu icon
Setting
Setting
Auto setup
This function enables Auto Keystone correction and Auto PC
adjustment by pressing the AUTO SETUP/CANCEL button
on the top control or the AUTO SET/CANCEL button on the
remote control. Settings for those functions can be altered
as follows:
Auto PC Adj .
On. . . . . . .Enables Auto PC Adjustment when pressing
the AUTO SET/CANCEL button on the remote
control or the AUTO SETUP/CANCEL button
on the top control.
Off. . . . . . .Disables Auto PC Adjustment.
Auto Keystone
Auto . . . . . Always works and corrects keystone distortion
according to the projector's tilt.
Manual . . .Works only when pressing the AUTO SET/
CANCEL button on the remote control or the
AUTO SETUP/CANCEL button on the top
control.
Off. . . . . . .Disables Auto Keystone.
✔ Notes:
• Auto PC Adj. and Auto Keystone cannot be set "Off" at the
same time.
• Auto Keystone corrects vertical distortion only, not correct
horizontal distortion.
• The Auto Keystone cannot work when Ceiling feature is set
"On" in the Setting menu (p.51).
• Perfect correction of the image distortion cannot be ensured
with the Auto setup function. If the distortion is not corrected
properly by pressing the AUTO SETUP/CANCEL or AUTO
SET/CANCEL button, adjust manually by pressing the
KEYSTONE button on the remote control or selecting
Keystone in the Setting menu (pp.26, 48).
• Fine sync, Total dots, Horizontal and Vertical position of
some computers cannot be fully adjusted with the Auto PC
Adjustment function. When the image is not provided properly
with this operation, manual adjustments are required (pp.34–
35).
Auto setup
Select Auto setup and this
box appears. Choose the
desired setting for Auto
keystone and Auto PC adj.
with the Point 7 8 buttons.
Press the SELECT button
here to display the other
languages.
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Setting Menu icon.
1

Use the Point ed buttons to move the red frame
pointer to the desired item and then press the SELECT
button. The Setting dialog box appears.
This projector has a Setting menu that allows you to set up
the other various functions described below.