Sharp PN-60TW3 - Manual (Page 30)

30
E
You can enable starting of the connection software from a commercially available USB flash drive.
USB flash drives that can be used:
• USB flash drives indicated on page 5 with a capacity of 128 MB or more.
• Use a USB flash drive in which nothing is saved.
1. Insert the USB flash drive into the USB port of the wireless controller.
2. Touch “Setup” ( ) in the home screen of Wireless mode.
3. Touch “Make Token”.
Making starts.
4. When the making completed message appears, remove the USB flash drive.
Caution
• Do not remove the USB flash drive while making is in progress.
And do not turn off the power of the monitor.
• Always create this on the wireless controller.
Incorrect operation will result if you copy the file from the wireless token to the USB flash drive using your computer.
TIPS
• When the USB flash drive connection software is started, the software will automatically connect to the wireless controller on
which the wireless token was created. (The software will also connect automatically over wireless LAN.)
Starting from a commercially available
USB flash drive