English, Connection with the control kit (optional), Connections – Sharp PN-V602 User Manual

Page 9

Advertising
background image

7

E

ENGLISH

■ Connection with the control kit (optional)

If performing operation of the monitor with the remote control

unit, the PN-ZR01 control kit (optional) is required.

Attach the remote control sensor box as shown in the following

illustration. (Right side recommended)

For the monitor in

landscape orientation

For the monitor in

portrait orientation

Caution

• When attaching the remote control sensor box, turn the

main power switch OFF.

• Connect the monitors together in a daisy chain with RS-232

cable.

1. Insert the anti-rotation protrusion of the mounting

bracket into the anti-rotation hole of the monitor.

2. Secure the stand angling hole of the monitor with the

mounting screw.

3. Adjust the angle of the remote control sensor box, and

secure it with the fixing screw, so that it may accurately

receive signals from the remote control unit.

Anti-rotation protrusion

Angle

adjustment

Anti-rotation hole

Mounting bracket

Mounting screw (short)

Fixing screw

Remote control

sensor box

Stand angling hole

4. Insert the remote control sensor box connection cable

into the control kit terminal.

Connection cable

Control kit terminal

Remote control

sensor box

Installing the batteries

1. Press the cover gently and slide it in the direction of the

arrow.

2. See the instructions in the compartment and put in the

batteries (R-6 (“AA” size) x 2) (supplied with the PN-ZR01

(optional)) with their plus (+) and minus (-) sides oriented

correctly.

3. Close the cover.

Connections

Advertising