Alcatel A5 LED 5085Y - Manual (Page 6)

9 10
In non-European Union jurisdictions:
Items of equipment with this symbol are not to be thrown into ordinary bins if
your jurisdiction or your region has suitable recycling and collection facilities;
instead they are to be taken to collection points for them to be recycled.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
• CHARGERS:
Mains powered chargers will operate within the temperature range of: 0°C to
40°C.
The chargers designed for your phone meet the standard for safety of information
technology equipment and office equipment use. They are also compliant with
the ecodesign directive 2009/125/EC. Due to different applicable electrical
specifications, a charger you purchased in one jurisdiction may not work in
another jurisdiction. They should be used for this purpose only.
Radio waves ���������������������������������������
Proof of compliance with international standards (ICNIRP) or with European
Directive 2014/53/EU (RED) is required of all phone models before they can
be put on the market. The protection of the health and safety for the user and
any other person is an essential requirement of these standards or this directive.
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO
RADIO WAVES.
Your phone is a radio transmitter and receiver. It is designed not to exceed
the limits for exposure to radio waves (radio frequency electromagnetic fields)
recommended by international guidelines. The guidelines were developed by
an independent scientific organisation (ICNIRP) and include a substantial safety
margin designed to assure the safety of all persons, regardless of age and health.
The radio wave exposure guidelines use a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg.
Tests for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands.
The highest SAR values under the ICNIRP guidelines for this device model are:
5085Y
Maximum SAR for this model and conditions under which it was
recorded
Head SAR UMTS 900 + Wi-Fi 0.88 W/kg
Body-worn SAR LTE Band 7 + Wi-Fi 1.54 W/kg
5085D
Maximum SAR for this model and conditions under which it was
recorded
Head SAR UMTS 900 + Wi-Fi 0.96 W/kg
Body-worn SAR GSM 900 + Wi-Fi 1.63 W/kg
During use, the actual SAR values for this phone are usually well below the
values stated above. This is because, for purposes of system efficiency and to
minimise interference on the network, the operating power of your phone is
automatically decreased when full power is not needed for the call. The lower
the power output of the phone, the lower its SAR value.
Body-worn SAR testing has been carried out at a separation distance of 5 mm.
To meet RF exposure guidelines during body-worn operation, the phone should
be positioned at least this distance away from the body.
If you are not using an approved accessory ensure that whatever product is used
is free of any metal and that it positions the phone the indicated distance away
from the body.
Organisations such as the World Health Organisation and the US Food and Drug
Administration have stated that if people are concerned and want to reduce their
exposure they could use a hands-free device to keep the phone away from the
head and body during phone calls, or reduce the amount of time spent on the
phone.
For more information, you can go to www.alcatel-mobile.com.
Additional information about electromagnetic fields and public health are
available on the following site: http://www.who.int/peh-emf.
Your phone is equipped with a built-in antenna. For optimal operation, you
should avoid touching it or degrading it.
As mobile devices offer a range of functions, they can be used in positions other
than against your ear. In such circumstances the phone will be compliant with the
guidelines when used with a headset or USB data cable. If you are using another
accessory ensure that whatever product is used is free of any metal and that it
positions the phone at least 5 mm away from the body.