Philips DL8780/15 - Manual (Page 15)

3 BIA measurement starts (when measuring barefoot).
- The symbol 'BIA' flashes on the display to indicate the device is
analyzing your data.
4 Stand still and keep full contact with the measurement platform until the
symbol ‘BIA’ stops flashing. The device beeps to indicate that the
measurement is completed. The results of the BIA measurement will not
be shown on the display.
5 The device is equipped with user profile recognition and automatically
selects the user based on their weight.
- When the device immediately displays the weight: no user is
recognized and results are not stored. See below for instructions.
-
When the device shows multiple users: more users are recognized
based on your weight. See below for instructions.
6 The measurement results are stored in the device in case of a successful
BIA measurement.
- The device can store up to 40 measurement results for each user
profile. The oldest results will be replaced by new measurement
results.
7 After measuring, step off the device. It switches off automatically.
When the device does not automatically recognize the correct
user profile:
- To select the correct user profile, step off the device and tap on the
measurement platform to confirm the correct user profile.
-
All profiles will be shown alternately on the display. Tap on the scale
to confirm yours.
- Make sure that you select the correct user.
Factory reset
To add up to 8 new user profiles or delete all measurement results from the
device, you can perform a factory reset. With the factory reset the device is
cleared from all existing user profiles and measurement results.
1 With the device turned on, press and hold the measurement unit button
located on the bottom of the device for 20 seconds, until "FACt" is shown
on the display. Now all data is deleted.
- After resetting the scale will automatically turn off.
- You can now create new users profiles (see 'Pairing the body analysis
scale to your mobile device and create a user profile').
15 English