MIDEA Dryer MLE45N1BWW - Manual (Page 43)

TROUBLESHOOTING
CHECK THESE SOLUTIONS IF YOUR DRYER...
solutions listed below before making a service call. This will help you save
time and money.
Problem Solution
•
After cleaning the exhaust hood, check that the flapper or louvers
move freely.
•
Reassemble the exhaust duct and hood, checking that the joints are
secure and sealed.
•
Operate the dryer and verify that the exhaust air is not obstructed in
the vent and that there are no leaks in the system.
•
The outside exhaust hood should be cleaned more frequently to ensure
proper operation.
The unit
doesn’t start.
•
Make sure the door is latched shut.
•
Be sure the power cord is plugged into a live
electrical outlet.
•
Check the home’s circuit breaker and fuses.
•
Press the Start/Pause button again if the door is
opened during the cycle.
The unit
doesn’t heat.
•
Check the home’s circuit breaker and fuses.
•
Select a heat setting other than Air fluff and check
that the Temp selection is not on “No heat”.
•
On a gas dryer, check that the gas supply is on.
•
Clean the lint filter and exhaust duct.
•
Dryer may have moved into the cool-down process
of the cycle.
Doesn’t dry.
•
Check all of the above, plus...
•
Be sure the exhaust hood outside the home can
open and close freely.
•
Check exhaust system for lint buildup. Ducting
should be inspected and cleaned annually.
•
Use a 4" rigid metal exhaust duct.
•
Do not overload. 1 wash load = 1 dry load.
•
Sort heavy items from lightweight items.
•
Large, bulky items like blankets or comforters may
require repositioning to ensure even drying.
•
Load may be too small to tumble properly. Add a
few towels.
Dry
er
Saf
ety
Oper
ation
R
equir
ements
P
arts and
F
eatur
es
Ins
tallation Ins
tructions
Dry
er Use
A
p
p
e
n
d
ix
Dry
er Car
e
T
ro
u
b
le
sh
o
o
tin
g
43
If your dryer has any of the following problems , you can check the