Xiaomi Mi Vacuum Cleaner G9 - Manual (Page 8)

12 13
3. Push the dust compartment release switch in the direction
indicated by the arrow, then gently remove the dust compartment
from the vacuum cleaner. 4. Remove the pre-filter first, then lift the handle of the cyclone
assembly and turn to counterclockwise until it stops, then pull to
lift out the cyclone assembly.
Care & Maintenance
5. Rinse the pre-filter, cyclone assembly, and dust compartment
with water until they are clean, then set each component aside to
thoroughly dry for at least 24 hours. 6. Wipe the contact points of the vacuum cleaner with a soft dry
cloth if they are dirty.
Do not use detergents, polishes, or air fresheners to clean the
dust compartment.
Do not clean the dust compartment, pre-filter, or cyclone
assembly in a dishwasher or washing machine, nor attempt to
dry any component in a tumble dryer, oven, microwave, or near
an open fire.
Notes:
Notes:
The dust compartment should be rinsed out at least once a
month.
The pre-filter and cyclone assembly should be cleaned once
every 3 to 4 months.
Pre-filter Cyclone Assembly Dust Compartment
1
2
Dust Compartment Release Switch
1
2
Pre-filter