Samsung Odyssey G3 LF24G35TFWNXZA 24" 16:9 144 Hz VA Gaming Monitor - Manual (Page 12)

12
To lock an anti-theft locking device:
W all Mount Kit Specifi cations (VESA)
―
Install your wall mount on a solid wall perpendicular to the fl oor. Before attaching the wall mount to surfaces
other than plaster board, please contact your nearest dealer for additional information. If you install the
product on a slanted wall, it may fall and result in severe personal injury. Samsung wall mount kits contain a
detailed installation manual and all parts necessary for assembly are provided.
• Do not use screws that are longer than the standard length or do not comply with the VESA standard
screw
specifi cations. Screws that are too long may cause damage to the inside of the product.
• When installing the wall mount other than the specified p roduct, its installation may be diffi cult.
• For wall mounts that do not comply with the VESA standard screw specifi cations, the length of the
screws may differ depending on the w all mount specifi cations.
• Do not fasten the screws too firm ly. This may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall
mount is used or the consumer fails to follow the product installation instructions.
• Do not mount the product at more than a 15 degree tilt.
• Standard dimensions for wall mount kits are shown in the table below.
Model name VESA screw hole specs
(A * B) in millimetres Standard Screw Quantity
100 F27G3*T*
F24G3*T* .0 x 100.0 4.0 mm Φ, 8.0 mm long 4 EA
100.0 x 100.0 4.0 mm Φ, 10.0 mm long 4 EA
―
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to
electric shock.
Optional
Anti-theft Lock
―
An anti-theft lock allows you to use the product securely even in public places.
―
The locking device shape and locking method depend on the manufacturer. Refer to the manuals provided
with your anti-theft locking device for details.
1 Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2 Put one end of the cable through the loop on the other end.
3 Insert the locking device into the anti-theft lock slot at the back of the product.
4 Lock the locking device.
‒ An anti-theft locking device can be purchased separately.
‒ Refer to the manuals provided with your anti-theft locking device for details.
‒ Anti-theft locking devices can be purchased at electronics retailers or online.