Samsung Odyssey G3 LF24G35TFWNXZA 24" 16:9 144 Hz VA Gaming Monitor - Manual (Page 29)

29
The message Check the cable connection and the settings of the source device. appears.
Check that the cable is properly connected to the product.
If the monitor is in
HDMI or DisplayPort mode, press the button to display the Function Key Guide
screen and select the → Input → VGA/HDMI/DisplayPort .
Out O f R ange is displayed.
This message appears when the signal from the graphics card exceeds the maximum resolution or
frequency for the product.
Change the maximum resolution and frequency to suit the product performance, referring to Standard
Signal Mode Table ( P .3 2 ).
The images on the screen look distorted.
Check the cable connection to the product.
The screen is not clear. The screen is blurry.
Remove any accessories (video extension cable, etc.) and try again.
Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky. There are shadows or ghost images left on the screen.
Check that the resolution and frequency for the PC a re within the range of resolution and frequency
compatible with the product. Next, if required, change the settings, referring to Standar d Signal Mode
Table ( P .3 2 ) in this manual and the Information menu on the product.
The screen is too bright. The screen is too dark.
A djust Brightness and Contrast .
Screen colour is inconsistent.
Change the Color settings.
The colours on the screen have a shadow and are distorted.
Change the Color settings.
White does not really look white.
Change the Color settings.
There is no image on the screen and the power LED blinks every 0.5 to 1 second.
The product is operating in power-saving mode.
P ress any key on the keyboard or move the mouse to return to normal operating mode.
Text is blurry.
If using a Windows OS (e.g. Windows 7, Windows 8, Windows 8.1 or Windows 10): Go to Control Panel →
Fonts → Adjust ClearType text and change Turn on ClearType .
Video playback is choppy.
Pl a yback of high-definition la rge video fi les can be choppy. This may be because the video player is not
optimised for the PC resource.
Try playing the fi le on another video player.
Sound issue
There is no sound.
Re-check the condition of the connected audio cable and / or adjust the volume.
Check the volume.
Check whether audio is set to mute.
The volume is too low.
A djust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound
card or software programme.
Video is available but there is no sound.
Sound cannot be hear d if an HDMI-DVI cable is used to connect the input device.
Connect the devic e using an HDMI cable or a DP cable.
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, h ave your PC servi ced.