Roland VAD507 V-Drums Acoustic Design Electronic Drum Kit - Manual (Page 4)

WARNING
Do not use or store in the following types of
locations
• Subject to temperature extremes
(e.g., direct sunlight in an enclosed
vehicle, near a heating duct, on top
of heat-generating equipment);
or are
• Damp (e.g., baths, washrooms, on
wet floors); or are
• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration and
shakiness; or are
• Placed in a poorly ventilated location.
Use only the stand that is recommended
This unit should be used only with
a stand (DCS series, DBS series) and
an all purpose clamp (APC-10) that is
recommended by Roland.
Do not place in a location that is unstable
When using the unit with a stand (DCS
series, DBS series) and an all purpose
clamp (APC-10) recommended by
Roland, the stand must be carefully
placed so it is level and sure to remain stable. If
not using a stand, you still need to make sure
that any location you choose for placing the unit
provides a level surface that will properly support
the unit, and keep it from wobbling.
WARNING
Be cautious to protect children from injury
Always make sure that an adult is
on hand to provide supervision and
guidance when using the unit in
places where children are present, or
when a child will be using the unit.
Do not drop or subject to strong impact
Otherwise, you risk causing damage
or malfunction.
CAUTION
Use only the specified stand(s)
This unit is designed to be used in
combination with specific stands (DCS
series, DBS series) and all purpose clamp
(APC-10) manufactured by Roland. If
used in combination with other stands, you risk
sustaining injuries as the result of this product
dropping down or toppling over due to a lack of
stability.
Evaluate safety issues before using stands
Even if you observe the cautions given
in the owner’s manual, certain types
of handling may allow this product to
fall from the stand, or cause the stand
to overturn. Please be mindful of any safety issues
before using this product.
Route all power cords and cables in such a way as
to prevent them from getting entangled
Injury could result if someone were to
trip on a cable and cause the unit to fall
or topple.
Avoid climbing on top of the unit, or placing heavy
objects on it
Otherwise, you risk injury as the result
of the unit toppling over or dropping
down.
Disconnect all cords/cables before moving the unit
Damage or malfunction may result if
you fail to disconnect all cables before
moving the unit.
Take care so as not to get fingers pinched
When handling the following moving
parts, take care so as not to get fingers,
toes, etc., pinched. Whenever a child
uses the unit, an adult should be on
hand to provide supervision and guidance.
• Stands
• Pedals
• Knobs
Keep small items out of the reach of children
To prevent accidental ingestion of the
parts listed below, always keep them out
of the reach of small children.
Included Parts:
• Cable tie
• Wing bolts
• Drum key
Removable Parts:
• Screws
• Washers
• Nuts
• Felt washers
• Springs
• Hand knobs
• Protective cap for dedicated connection cable
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
plug must be unplugged from the outlet.
The symbol alerts the user to important instructions or
warnings.The specific meaning of the symbol is
determined by the design contained within the triangle. In
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.
About WARNING and CAUTION Notices About the Symbols
ALWAYS OBSERVE THE FOLLOWING
Additional Precautions
• Use a reasonable amount of care when using the
unit’s buttons, sliders, or other controls; and when
using its jacks and connectors. Rough handling can
lead to malfunctions.
• This instrument is designed to minimize the
extraneous sounds produced when it’s played.
However, since sound vibrations can be transmitted
through floors and walls to a greater degree than
expected, take care not to allow these sounds to
become a nuisance others nearby.
• This document explains the specifications of the
product at the time that the document was issued.
For the latest information, refer to the Roland
website.
Intellectual Property Right
• It is forbidden by law to make an audio recording,
video recording, copy or revision of a third party’s
copyrighted work (musical work, video work,
broadcast, live performance, or other work), whether
in whole or in part, and distribute, sell, lease, perform,
or broadcast it without the permission of the
copyright owner.
• Do not use this product for purposes that could
infringe on a copyright held by a third party. We
assume no responsibility whatsoever with regard to
any infringements of third-party copyrights arising
through your use of this product.
• The copyright of content in this product (the sound
waveform data, style data, accompaniment patterns,
phrase data, audio loops and image data) is reserved
by Roland Corporation.
• Purchasers of this product are permitted to utilize
said content (except song data such as Demo
Songs) for the creating, performing, recording and
distributing original musical works.
• Purchasers of this product are NOT permitted to
extract said content in original or modified form, for
the purpose of distributing recorded medium of said
content or making them available on a computer
network.
• The SD logo and SDHC logo are trademarks
of SD-3C, LLC.
• ASIO is a trademark and software of Steinberg Media
Technologies GmbH.
• This product contains eParts integrated software
platform of eSOL Co.,Ltd. eParts is a trademark of
eSOL Co., Ltd. in Japan.
• The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Roland is under license.
• This Product uses the Source Code of μT-Kernel under
T-License 2.0 granted by the T-Engine Forum (www.
tron.org).
• Roland and BOSS are either registered trademarks
or trademarks of Roland Corporation in the United
States and/or other countries.
• Company names and product names appearing
in this document are registered trademarks or
trademarks of their respective owners.
USING THE UNIT SAFELY IMPORTANT NOTES