Connecting external equipment, Signal flow – Roland V-4EX Four Channel Digital Video Mixer with Effects User Manual
Page 15

15
Connect external equipment as shown in this chapter. For information on specific connection methods, refer to the following pages.
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
fig.peripheral-connection.eps
For information on signal formats that can be input and output, refer to “About Input/Output Formats” (p. 23).
Signal Flow
The internal signal flow of the V-4EX is as shown below.
fig.signal-flow.eps
1
2
3
4
Frame Sync (480p/576p)
Input Selector
HDMI
Video
1
2
3
4
Composite
OUT
HDMI
Video
HDMI
Video
HDMI
RGB/
Component
Video
RGB/Component
OUT
HDMI OUT
Audio In
S-Video
Video Mixer / PinP / Key / Effect
A-BUS
B-BUS
Audio Mixer
USB OUT
Delay
PVW OUT
Output Fade / Freeze
Scaler
Scaler
Delay
Output
+
Input
Connecting External Equipment