Sony XDCA-FX9 Extension Unit for PXW-FX9 Camera - Manual (Page 114)

114
AP Mode
Settings
Access point mode
connection settings
Channel
Auto(5GHz) / Auto / CH1 /
CH2 / CH3 / CH4 / CH5 / CH6
/ CH7 / CH8 / CH9 / CH10 /
CH11
Sets the wireless LAN channel.
Auto(5GHz) is available on the PXW-Z280V only.
Camera SSID & Password Displays the SSID and password of the camcorder.
Regenerate Password
Execute / Cancel
Creates a new password.
Execute: Execute function.
IP Address Displays the IP address of the camcorder in access point
mode.
Subnet Mask Displays the subnet mask of the camcorder in access point
mode.
ST Mode
Settings
Station mode
connection settings
Camera Remote Control
Enable / Disable
Sets whether to enable remote control from a device
connected to the camcorder by wireless LAN in station mode.
Connected Network Displays the connected wireless LAN network (access point).
Scan Networks Detects wireless LAN networks (access points) and displays a
list.
Select a destination from the list to connect.
Manual Register Registers settings for manual connection to an access point.
SSID Enter the SSID for the destination to connect.
Security
None / WEP / WPA
Set the type of security for the destination to connect. Select
WPA if the type of security of the destination access point is
WPA or WPA2.
Password Enter the password for the access point to connect.
DHCP
On / Off
Turns DHCP on/off.
IP Address Enter the IP address of the camcorder when DHCP is set to
Off.
Subnet Mask Enter the subnet mask of the camcorder when DHCP is set to
Off.
Gateway Enter the default gateway of the camcorder when DHCP is set
to Off.
DNS Auto
On / Off
Turns auto DNS acquisition on/off.
Primary DNS Server Enter the primary DNS server when DNS Auto is set to Off.
Secondary DNS Server Enter the secondary DNS server when DNS Auto is set to Off.
Network
Item Sub-items and Settings Description