Sony a7 II Mirrorless Camera with 28-70mm Lens - Manual (Page 27)

27 GB
D:\NORM'S JOB\SONY HA\SO17_STR-DH190_PMRF1\STR-DH190 (PMRF
01)\4726907121_GB\070ADD.fm
masterpage: Right
STR-DH190
4-726-907- 12 (1)
Menu/Other F
u
nctions
Using the Menu
1
Press AMP MENU.
The menu is displayed on the display
panel.
2
Press / to select the menu
item you want and then
press .
3
Press / / / to select the
parameter/setting you want,
and then press
.
To return to the previous display
Press or BACK.
To exit the menu
Press AMP MENU.
Some parameters and settings may appear
dimmed on the display panel. This means that
they are either unavailable or fixed and
unchangeable.
The default settings are underlined.

“SP IMP.” (Speaker
impedance)
For details, see “Setting the speaker
impedance” (page 19).

“FM MODE” (FM station
receiving mode)
• “STEREO”
This receiver will decode the signal as
stereo signal when the radio station is
broadcast in stereo.
• “MONO”
This receiver will decode the signal as
mono signal regardless of the broadcast
signal.

“BT MENU” (BLUETOOTH
settings menu)
• “BT STBY” (BLUETOOTH standby mode)
– “STBY ON”: You can turn on this
receiver from a paired BLUETOOTH
device.
– “STBY OFF”: This receiver cannot be
turned on from a paired BLUETOOTH
device.
• If you set “BT STBY” to “STBY ON”, this receiver
turns on when you establish a BLUETOOTH
connection from a BLUETOOTH device.
• You cannot change this setting when “BT
POWER” is set to “BT OFF”.
• “BT AAC” (BLUETOOTH codec – AAC)
– “AAC ON”: AAC audio is available if the
BLUETOOTH device supports AAC.
– “AAC OFF”: AAC audio is not available.
• You cannot change this setting when “BT
POWER” is set to “BT OFF”.
• While a BLUETOOTH device is connected, the
settings of this function cannot be changed.
You can enjoy high-quality sound if AAC is
enabled.
Menu/Other Functions
Note
/ / / ,
AMP MENU
BACK
Menu list
Note
Note
Tip